The machine consists of the BELARUS basic tractor 320.4i of the pluzhno-brush equipment. It is equipped with the reliable Italian Lombardini LDW1603/B3 engine certified on the III step of the Directive 2000/25/EU which distinctive features are: low level of content of harmful substances in exhaust gases (compliance to the Euro-3A standards) and high efficiency at small operational costs.
It is intended for cleaning of streets, areas, roads and sidewalks of new-fallen snow, garbage, for a design of backfilling and a trench backfill and holes. The compact sizes allow it to maneuver between transport, to work at domestic territories, but at the same time the small mass of a tractor does not cause is damaged
ENGINE |
|
---|---|
Type | four-cycle diesel engine |
Model | LOMBARDINI LDW1603/B3 |
Power, kW (h.p.) | 26,5 (36,0) |
Rated rotating speed, RPM | 3000 |
Number of cylinders, piece | 3 |
Maximum torsion torque, Nanometer (kgsm) | 92,0 |
Coefficient of a stock of a torsion torque, % | 12 |
Capacity of a fuel tank, l | 32 |
Class | 0,6 |
TRANSMISSION |
|
---|---|
Clutch | dry, one-disk, frictional, constantly closed |
Transmission | mechanical, step with constant-mesh gears, with gear sleeves of easy inclusion, dual-band with the lowering reducer |
Number of gears | |
forward | 8 |
back | 4 |
Motion speed, km/h: | |
forward/back | 1,0-25,2/1,8-13,3 |
Back VOM: | |
dependent I, RPM | 540 |
dependent II, RPM | 1000 |
synchronous I, about/m a way | 3,4 |
synchronous II, about/m a way | 6,3 |
SIZES AND WEIGHT |
|
---|---|
Type | pluzhno-brush, one-dump |
Basic chassis | Belarus-tractor 320.4 |
Productivity during the cleaning of the carriageway of snow, mg/h | 10400-18000 |
The maximum width for one pass, mm: | |
dump | 1800 |
brushes | 1300 |
Maximum height of the cleaned new-fallen snow for one pass, mm | 300 |
Dump turning angle, hail | +/-30 |
Angle of installation of a brush, hail | 30 |
Leading dimensions, mm | |
length | 5500 |
width | 1800 |
height (taking into account the flashing indicator) | 2370 |
Weight is operational, kg | 2250 |
Rotating speed of a brush (at 540 RPM VOM), RPM | 260 |
HYDROHINGED SYSTEM |
|
---|---|
Type | separate and modular |
Loading capacity on an axis of suspension, kg | 1100 |
Maximum pressure, kgf/cm2 | 200 |
Pump capacity, l/min | 17 |
Capacity of an oil tank of a hydraulic system and rudder control, l | 10 |
Front driving axle: portal, with self-locking differential.
Brakes: the main — disk in oil, parking — the main brakes recorded by the separate lever in the slowed-down state.
Rudder control: hydrovolume with the hydraulic booster on the basis of the metering pump.
Cabin: safe, comfortable.
Complete set: working headlights, mechanical fixing of a back hinge plate.